Fibre glass (50 or 100 mm) and synthetic (50 mm) media pads are available. A heavy application of filter adhesive and progressive density fibre construction result in high dust holding capacity.
|
|
The 18 gauge galvanised steel
welded frame assembly retains the filter media between wire grids.
The grid on the air entering side is hinged to allow easy access
to the pad. Fibre glass (50 or 100 mm) and synthetic (50 mm) media pads are available. A heavy application of filter adhesive and progressive density fibre construction result in high dust holding capacity. |
|
 |
Pleated panel filters in 50 or 100 mm thicknesses are constructed with a moisture resistant beverage board frame. Die cut fingers separate and stabilise each pleat during pulsation or surge |
|
 |
Cylindrical cartridge filters are designed for the Pulse-Guard pulse jet, self-cleaning system, or other manufacturers' equipment. The cartridges are reinforced on both sides by expanded metal retainers to withstand severe surging and reverse pulsing without cartridge failure. Select from a variety of media's depending on service conditions. |
|
 |
Micro glass media, pleated with corrugated aluminium separators, is sealed inside galvanised steel cell sides. Expanded metal face guards are installed on both sides of the filter. Rated at 500 - 625 fpm face velocity. 60% and 90% efficiencies. |
|
 |
Vari + Plus GT filters are made with multiple mini-pleat media packs designed for higher air flow systems, up to 750 fpm. Each media pack is reinforced on the downstream side by an expanded metal grid. 65%, 75%, 85%, 95% and 98% efficiencies. |